How to Make an SVG Jigsaw Template
Generate interlocking puzzle outlines, choose the physical size, and prepare a small test before making a full puzzle.
In this guide 6 sections
The SVG Jigsaw Generator creates a vector pattern of interlocking pieces. Set the overall dimensions, number of pieces, and tab variation, then download SVG. It generates the puzzle outlines; it does not automatically place a photograph across the pieces.
1. Choose the size and piece count together
Set Width (mm) and Height (mm) for the overall puzzle, then choose Pieces X and Pieces Y. The total number of pieces is the horizontal count multiplied by the vertical count.
For example, a 300 × 200 mm puzzle with six pieces across and four down has 24 pieces. Its underlying cell spacing is about 50 mm in each direction before the tabs and sockets. Increase the count when you want smaller pieces, rather than treating the count independently of physical size.
The preview is scaled to fit the page. Read the dimension fields instead of judging physical size from how large the puzzle looks on your screen.
2. Use a seed to keep a useful pattern
Enter a Seed or use Random to explore another set of edges. Record the seed together with the piece counts, dimensions, Tab Size, and Edge Jitter. The seed is only one part of the recipe.
Download a pattern you like before changing the controls. A saved SVG provides a fixed reference when you need to compare a test cut with the original design.
3. Adjust tabs and variation
Tab Size changes the scale of the interlocking features. Smaller tabs can look more subtle but may become fragile or hard to manufacture at a small piece size. Larger tabs need enough room around them.
Edge Jitter varies the boundaries so pieces feel less uniform. Begin with a moderate value and inspect the narrowest parts. Corner Radius (mm) softens the outside border; it does not automatically round or reinforce every internal piece.
4. Download and inspect the SVG
Choose Download SVG Puzzle. The file carries the specified width and height in millimeters and contains the vector border and internal outlines. Open it in the destination application and verify that those physical dimensions are interpreted correctly.
If you want a cover image or instruction card, compose that separately in the editor. Keep decorative artwork and production paths clearly distinguishable. A PNG preview is useful for showing the design but does not replace vector outlines for a workflow that needs them.
5. Test the material and fit before production
The generator draws geometry. It does not calculate material-specific cutting kerf, machine compensation, or the required grip between pieces. Make a small test using the actual material and equipment, then inspect tab strength and how tightly the pieces fit.
Confirm with the production workflow which colors or layers represent cuts and whether any paths need adjustment. A valid SVG alone does not prove that a pattern is ready for every laser, cutter, or material.
Troubleshooting
If pieces are too small, reduce the counts or enlarge the puzzle. If tabs are too delicate, adjust their size and test a less dense pattern. If the physical size changes on import, check the destination’s unit conversion and verify a known measurement before making the full puzzle.
Make it yours.
Keep this guide open and give it a try.